VESSEL REVIEW | Australian tech firm introduces 3D-printed USV demonstrator
Western Australian manufacturer Hyperion Systems has begun on-water testing of an unmanned surface vehicle (USV) whose hull was produced using large-format additive manufacturing or 3D printing at the company's facility in Henderson.
The remotely operated USV reached 40 knots during its initial sea trial. Hyperion said later tests will assess its projected cruise speed of 20 to 30 knots, alongside its ability to carry more than 200 kg (440 lb) and travel up to 200 kilometres (120 miles).
The vessel was designed by Henderson-based naval architecture firm Versatile Marine and is the inaugural vessel in an autonomous vessel family developed by Hyperion.
The USV has an LOA of 4.6 metres (15 feet), a beam of 1.67 metres (5.48 feet), and a draught of only 0.3 metres (one foot).
Durable hull coupled with scaled production
The craft can be fitted with either an internally mounted waterjet or an outboard engine. Hyperion said the platform is intended to support varied propulsion systems and accommodate different degrees of autonomy.
The hull is printed in HDPE from recycled polymer waste. In Hyperion's fused granulate fabrication process, a screw extruder mounted on a robot arm or gantry melts polymer pellets and applies the material as beads, building the part layer by layer.
The anti-fouling properties and impact resistance of HDPE have been cited among the hull's characteristics.
Hyperion said the printing process can produce the hull in about 40 hours, compared with four to six weeks using traditional boatbuilding methods. According to Hyperion Chief Executive Joshua Wigley, printing and fitting out a complete 4.6-metre USV takes approximately seven days.
Wigley said that a single machine can produce two hulls per week, and that the five machines currently available could deliver more than 40 per month. The company has stated it is provisioning to build 10 units a month, with the ability to scale to more than 100.
A Hyperion spokesperson said that, "the core research and development focus over the last six to 12 months has been on converting industrial waste into feedstock for the machines. This is critical for sovereign supply chain strength as it doesn't rely on overseas imports."
Fiction Labs installed the propulsion unit and guidance system for the trial.
Hyperion selected Greenroom Robotics' Greenroom Advanced Maritime Autonomy (GAMA) software as the USV's navigation and control platform. GAMA supports remote control, autonomous operation, waypoint navigation, grid searches and patrols, and it can integrate optical and infrared cameras, radar, lidar, sonar and AIS, along with satellite, 4G, 5G, long-range wi-fi and encrypted radio-frequency communications.
Development permitting tailored solutions for operator requirements
Hyperion is taking a partner-led approach to payloads, with configurations developed around customer requirements.
"We see the [USV] playing a key role supporting missions including intelligence, surveillance and reconnaissance, border protection and security operations,” said project manager Jacob Kleinman. “Its modular payload capability also allows rapid reconfiguration for mission-specific roles.”
Before the end of this year, Hyperion plans to provide an eight-metre (26-foot) USV prototype to an unnamed European navy for use in a major naval exercise. Astra Marine has also promoted an 8.4-metre (28-foot) USV within the same family of craft.
"Our longer-term ambition is to connect Australian vessel manufacturing with the ability to produce closer to where vessels are needed," said Wigley.

