Amanda Joe Patti Marine Enterprises
Other Workboats

VESSEL REVIEW | Amanda Joe – Florida shipyard expands repair capacity through 800-ton floating dock

Built with a US$1.2 million MARAD grant, the floating dock was launched down the yard's own railway and moored to an existing spud barge in shallow water. Its first job was a US Navy diving training boat.

Baird Maritime

Pensacola, Florida-based shipbuilder Patti Marine Enterprises has added an 800-ton floating dry dock to its yard on Bayou Chico. The dock, which has the name Amanda Joe, gives the yard a dedicated means of lifting vessels for repair and maintenance.

The company announced on November 19, 2025, that the dock had been launched and was in operation. Its first job was on a US Navy vessel, the diving training boat Poseidon.

Acquisition allowing the owner to expand beyond newbuildings

Before the dock entered service, the yard relied on a 1,200-ton rail system of its own construction. That system is used mainly to launch newbuilds, and the yard's capacity to service and restore existing vessels had been limited.

"From ocean-going fishing vessels to passenger ferries, Patti has built them all – now we'll be able to service them all as well," Frank Patti Jr. told regional economic development organisation FloridaWest EDA in July 2024. He added that the expansion, "could help Patti Marine double in size in the next five years."

The dock was supported by a US$1.2 million matching grant from the US Department of Transportation's Maritime Administration (MARAD) under its FY2022 Small Shipyard Grant Program. The award was announced on July 21, 2022, as part of US$19.6 million allocated to 24 small shipyards in 19 states.

Patti's application to the US Army Corps of Engineers, published in April 2023, described a structure of approximately 36.6 by 20.4 metres (120 by 66.9 feet).

Tailored to maximise the advantages offered by the yard's on-site conditions

Amanda Joe

The dock was to be built at the upland shipyard and launched using the existing rail system. It would then be permanently tethered to the yard's existing 61- by 12.2-metre (200- by 40-foot) spud barge, with no new moorings, pilings or other structures.

The application proposed no dredging. Seabed elevations at the operating position range from 5.2 to 6.4 metres (17 to 21 feet) below mean low water. Even at maximum submergence, the dock would keep at least 0.3 metres (one foot) of clearance between its hull and the bottom.

Docking and undocking were planned for high tide to make use of the greatest available depth.

The tidal change at the site is approximately 0.3 metres. Vessels serviced by Patti Marine have an average draught of approximately three metres (10 feet), according to the application.

The dock lies approximately 207 metres (680 feet) from the near bottom edge of the federal navigation channel. Patti Marine has said that BMS undertook the functional design.

The company said the dock will serve military craft, commercial vessels, tugs and workboats for private, commercial and government customers.

When the dock entered service, the yard was carrying out repairs on a 26.8-metre (87.9-foot) research vessel.

Amanda Joe
SPECIFICATIONS
Type of vessel: Floating dry dock
Owner: Patti Marine Enterprises, USA
Designer: BMS, USA
Builder: Patti Marine Enterprises, USA
Length overall: 36.6 metres (120 feet)
Beam: 20.4 metres (66.9 feet)
Capacity: 800 tons
Operational area: Pensacola, Florida, USA