A new Ro-Pax ferry has been delivered to a Norwegian owner while another one in Scotland has begun undergoing sea trials. Australian and UK firms have unveiled designs for new electric vessels. Lastly, a New Zealand-builder tour operator has placed a repeat order with a local builder.
New Zealand-based tour operator Whale Watch Kaikoura has placed an order for an additional 24-metre catamaran vessel to expand the company's year-round passenger capacity.
The vessel will belong to the same series as the 2021-built Te Ao Marama and the 2022-built Wheketere (pictured). The catamaran will also be constructed by Q-West Boat Builders to a design by local naval architecture firm Teknicraft.
The new catamaran will have a length of 24 metres, a main deck cabin with adjacent outside viewing decks, and a VIP seating area on the upper deck. The propulsion setup will consist of Scania engines driving Hamilton waterjets.
Whale Watch Kaikoura Chief Operating Officer Kauahi Ngapora said that the catamaran will be the company's ninth Teknicraft-designed vessel as well as its eighth vessel to be built by Q-West.
CalMac Ferries' Ro-Pax Glen Rosa has completed her first sea trials in waters between Arran and Bute in south-west Scotland.
The 102-metre, 7,772GT LNG dual-fuel ferry is being built for CalMac by Ferguson Marine, which is targeting delivery to owner Caledonian Maritime Assets CMAL) in early February 2027.
The ferry departed Inchgreen quayside in Greenock under her own power. Ferguson Marine said that over the coming days, trials would assess the vessel’s handling and her navigation, automation, safety, power generation and propulsion systems.
The delivery schedule was changed from the fourth quarter of 2026 to allow replacement propeller blades to be fitted during late January drydocking after cavitation was identified.
The Scottish Government said the replacement blades have been delivered.
Norwegian operator Fjord1 has taken delivery of Skagastøl, the first in a planned group of four battery-hybrid vessels for the E39 Lavik–Oppedal crossing in Western Norway.
The ferry's voyage from Turkey to Norway will cover approximately 3,700 nautical miles, and her progress will be affected by weather and sea conditions.
Fjord1 said the work after arrival will include testing the systems and training the crew.
Deliveries of the remaining three vessels will follow through winter and spring. Each new ferry will enter service individually after preparation and initial testing.
UK-based Artemis Technologies has unveiled a 15-metre fully electric hydrofoil vessel design capable of carrying up to 50 passengers.
The vessel scales up the company's 12-passenger hydrofoil vessel. Artemis is aiming the design at transit in urban areas and islands, premium passenger services, and logistics operations.
The design will be offered in transit, executive and cargo configurations. The transit layout is intended for high-occupancy, high-frequency services connecting urban centres, island communities and coastal destinations.
The executive variant will have lower-occupancy premium cabins, and the cargo version will have onboard space and payload matched to route requirements.
Western Australia-based naval architecture firm Global Marine Design (GMD) has published details of a new 12.5-metre hybrid electric ferry developed for service on the rivers of the Kashmir region in northwestern India.
The aluminium ferry was designed to strict limits on length, beam, draught, and air draught. A draught of 0.6 metres and an air draught of 2.25 metres will allow the vessel to navigate shallow channels and pass underneath low bridges.
Two steerable electric pod drives will propel the ferry. The designer said the vessel can travel at just above eight knots for more than two hours on battery power alone.
An onboard generator will be available as a range extender in case the ferry is travelling between two charging stations that are far apart.